Mcombo Power Lift Chair Vibrator Not Working? Read This!
Experiencing discomfort with your Mcombo Power Lift Chair is frustrating when the vibrator function stops working. The Mcombo Company prioritizes customer satisfaction, but troubleshooting mcombo power lift chair vibrator not working issues yourself can often save time. Understanding basic electrical components might be all you need to restore the massage feature of your chair. This guide will walk you through a practical approach to diagnose and potentially resolve the situation.
Image taken from the YouTube channel Saul Engineered , from the video titled Bypass a Recliner Motor Switch – Get Your Recliner Moving Again .
Mcombo Power Lift Chair Vibrator Not Working? Read This!
This guide aims to help you troubleshoot why the vibrator in your Mcombo power lift chair might not be working. We’ll walk you through common issues and simple fixes you can try yourself.
Initial Checks: Power and Connections
Before diving into more complex solutions, let’s cover the basics. Sometimes the simplest explanation is the correct one.
Ensuring Power Supply
- Check the Power Outlet: Verify that the power outlet the chair is plugged into is functioning. You can test this by plugging another device into the same outlet.
- Power Cord: Make sure the power cord is securely plugged into both the chair and the wall outlet.
- Power Surge: Consider whether a power surge might have occurred, potentially damaging the chair’s electrical components. Unplug the chair, wait a few minutes, and plug it back in to see if it resets.
Examining the Remote Connection
- Remote Batteries: The remote control is crucial for activating the vibration feature. Ensure the batteries are fresh and properly installed in the remote.
- Remote Functionality: Test other functions on the remote, such as the lift mechanism. If none of the functions are working, the remote itself might be the issue.
Inspecting the Wiring
Loose or damaged wiring is a frequent cause of electrical problems in power lift chairs.
Locating the Vibrator Control Box
- The control box is usually located underneath the chair, often near the motor. Consult your chair’s user manual if you’re having trouble finding it.
Checking Connections to the Control Box
- Visually Inspect Wires: Carefully examine all the wires connected to the control box for any signs of damage, such as cuts, frayed wires, or loose connections.
- Secure Connections: Ensure all wires are firmly connected to the control box. If any are loose, gently push them back into place.
- Connector Plugs: Check any connector plugs or harnesses used to connect wiring. Ensure these are tightly connected and undamaged.
Tracking the Vibrator Motor Wiring
- Trace the wires specifically leading from the vibrator motor to the control box. These wires may be thin and easily damaged.
- Ensure the wiring isn’t pinched or compressed under the chair frame.
Examining the Vibrator Motor
The vibrator motor itself might be faulty.
Locating the Vibrator Motor
- This is typically located inside the chair, often within the seat cushion or backrest. Again, refer to your user manual.
Listening for Motor Activity
- With the chair plugged in and the remote set to activate the vibration, listen closely for any noise coming from the vibrator motor. Even if the chair isn’t vibrating, you might hear a humming or buzzing sound indicating the motor is trying to function.
Testing Motor Resistance (Advanced – Use Caution)
- Warning: This requires a multimeter and some electrical knowledge. Improper use of a multimeter can be dangerous. If you are not comfortable with electrical testing, seek professional help.
- Procedure: Disconnect the vibrator motor from the control box. Use a multimeter set to measure resistance (Ohms) and connect the probes to the motor terminals. A reading of zero or infinite resistance suggests a faulty motor.
- Replacing the Motor: If the motor is faulty, you may need to purchase a replacement motor from Mcombo or a third-party supplier. Follow the manufacturer’s instructions for replacing the motor.
Resetting the Chair’s System (If Applicable)
Some Mcombo power lift chairs have a reset function that can resolve minor electrical glitches.
Checking the User Manual
- Consult your chair’s user manual to determine if a reset procedure is available.
- The manual should provide specific instructions on how to perform the reset. This might involve unplugging the chair, pressing a specific button combination on the remote, or holding a reset button on the control box.
Common Reset Steps (General Guidance)
- Unplug the chair from the power outlet.
- Wait for 5-10 minutes.
- Locate the reset button (if available) on the control box or remote.
- Press and hold the reset button for 10-15 seconds.
- Plug the chair back into the power outlet.
- Test the vibration function.
Troubleshooting Table for Quick Reference
| Problem | Possible Cause | Solution |
|---|---|---|
| No vibration | No power | Check power outlet, power cord, remote batteries |
| Vibration weak or intermittent | Loose wiring | Inspect and secure all wiring connections, especially at the control box and vibrator motor |
| Remote not working | Dead batteries, damaged remote | Replace batteries, test other remote functions, consider remote replacement |
| Vibrator motor not making any noise | Faulty motor | Listen closely for motor noise, consider testing motor resistance (with caution), replace motor if necessary |
| Vibration stopped suddenly | Power surge, internal fault | Unplug and replug chair, try reset procedure, contact customer support if problem persists |
Mcombo Power Lift Chair Vibrator Troubleshooting: FAQs
[This section addresses common questions regarding troubleshooting a non-functional vibrator in your Mcombo power lift chair. If you’re experiencing issues, these FAQs can help you understand potential causes and solutions.]
What are the first steps to take when my Mcombo power lift chair vibrator is not working?
Begin by checking all power connections to the chair, ensuring they are securely plugged in. Also, inspect the remote control for any damage or battery issues, as this could prevent the vibrator function from activating. If the power connections and remote are fine, proceed to examine the wiring to the vibration motor itself.
Could a blown fuse cause the Mcombo power lift chair vibrator not to work?
Yes, a blown fuse is a common reason why the Mcombo power lift chair vibrator might be inoperative. Locate the fuse box (usually in the power adapter or control box) and inspect the fuse. If it’s blown, replace it with a fuse of the same amperage.
Where is the vibration motor located in an Mcombo power lift chair?
The location varies slightly by model, but generally, the vibration motors are located in the backrest and seat of the Mcombo power lift chair. This allows for a more distributed massage effect.
What if none of the troubleshooting steps fix my Mcombo power lift chair vibrator not working?
If you’ve checked the power connections, remote, fuse, and wiring, and the Mcombo power lift chair vibrator still isn’t functioning, it’s likely an internal component failure. In this case, contact Mcombo customer support or a qualified repair technician for assistance. They can diagnose the problem further and potentially replace the faulty part.
Hope this helped get your chair humming again! Figuring out why the mcombo power lift chair vibrator not working can be a pain, but hopefully, you’re back to relaxing now.
